You’ll be able to download software for free that does this for you, and it’s incredibly easy to use. The only thing you need to do is upload your models to their service. All of the controls are located in their network (or the cloud), meaning you don’t have to do any of the work. From here you can choose your model, connect to WiFi, or load filament. The printer only has a power button along with a 2.5 inch touch screen. After all, it is a printer for novices and the sound of the cloud tends to scare those who aren’t quite as used to technology. I wasn’t sure how I felt about the software being cloud-based at first. One thing I would like to mention is that when you do print, be sure to apply a bit of glue from a glue stick to the print bed since it’s not heated. If you don’t want to deal with configuring your printer but still want to get involved, this would be a great way to start, or at least a great way to begin. This seems to be a common theme with this printer: hiding most if not all of the technical aspects of 3D printing. Furthermore, sometimes you have to do this manually, but fortunately the cube has this down. This is typical with most printers since during shipment the parts tend to get a bit out of line. Most of the time you’ll be watching the printer run its own calibration process. There’s a reason why the 3D Systems Cube Printer is meant for beginners – it’s one of the easiest printers that I’ve ever had to setup and within 30 minutes I was starting my first print. This size tends to be sufficient for most of my projects, and if I need something bigger I can always print modules and snap them together. In comparison to other printers such as the MakerBot Replicator 2, it is a bit on the small size, but for its cost it’s definitely not bad at all. This helps maximize the total print volume of 6 in x 6 in x 6 in with a maximum volume of 216 cubic inches. When printing you’ll notice that the print head moves in a horizontal fashion while the bed controls any vertical or back-and-forth motion. You can easily fix this by removing and reinserting the metal end, but it’s a tad annoying at times. Fortunately they recognized this downfall and an error message pops up. This causes the print material to not melt properly. One problem that I did happen to find is that the mechanism for printing that locks the end of the tube sometimes didn’t snap correctly into place. While it doesn’t look the prettiest in the form of a box, it definitely gets the job done. I personally feel as if the design is very sleek and modern. For those of you who don’t want to constantly clean your print head and are willing to pay a few extra dollars, this would be the perfect choice for you. Other 3D printers that come with a print head built into the printer itself enable you to buy filament for around $20 – $25. It costs $39 for each new cartridge and they’re all of PLA material. The con of course is the extra cost that’s associated with buying a new cartridge. The purpose of this is to avoid having to clean out the extruder constantly since you’re always getting a new one. The print head is located within the ink cartridge, so the head is actually located in the cartridge. In a sense, this is very similar to specific ink-jet printers. 3D Systems differs by building part of this feature into the actual filament cartridge itself near the end of the plastic tube into which filament is loaded. For those of you with experience in the 3D world, you should realize that a printer normally features a separate or multiple extruders that melts the plastic directly on the print head. The 3D Systems Cube Printer is quite different than most printers.
The one downside that I would like to mention off of the bat is that you’re required to use the 3D systems print filaments, which can be a bit more expensive than other, generic filament.
#Cube pro printer review android#
It comes with WIFI capability and you can control the printer directly from a PC, Mac, iOS or Android device by using their app. This enables the printer to have dual-color printing functionality in 20 different shades when using either ABS or PLA filament.
Looking at the 3D Systems Cube Printer as a whole, we see that it comes equipped with two extruders. Not only is the printer very easy to use, but it’s a great pick for the average consumer that wants to experience great print qualities in an office or school setting. The 3D Systems Cube Printer is one of the few mid-range 3D printers that has the capability of producing products with incredible accuracy, detail and smooth layers using PLA filament.
0 kommentar(er)
